Air source
|
0.6~0.8MPa argon and nitrogen gas cylinders, or compressed air (it is not recommended to use compressed air in the glove box)
|
Exhaust design
|
Specially designed exhaust port, which can be externally connected through devices such as KF40
|
Gas consumption
|
Single sealing consumes about 480ml of gas
|
Coin cell Crimping Sealing pressure
|
Manual regulating valve control, maximum pressure 1MPa, recommended pressure 0.7MPa, accuracy within ± 0.5%
|
Sealing stroke
|
30mm
|
Sealing Crimping coin cell mold
|
Standard configuration of CR20 series packaging molds, optional or additional specifications
|
Shelling mold
|
Various specifications such as CR16, CR20, CR24, and CR30 can be selected or added
|
Installation dimensions
|
L290mm*W205mm*H330mm
|
Weight
|
25Kg
|
Other functions
|
With the function of preventing short circuit of battery seal
|
Structure material
|
High strength chrome steel, with environmentally friendly plating and spraying treatment on the surface, never rusting
|
Air source
|
0.6~0.8MPa argon and nitrogen gas cylinders, or compressed air (it is not recommended to use compressed air in the glove box)
|
Exhaust design
|
Specially designed exhaust port, which can be externally connected through devices such as KF40
|
Gas consumption
|
Single sealing consumes about 480ml of gas
|
Coin cell Crimping Sealing pressure
|
Manual regulating valve control, maximum pressure 1MPa, recommended pressure 0.7MPa, accuracy within ± 0.5%
|
Sealing stroke
|
30mm
|
Sealing Crimping coin cell mold
|
Standard configuration of CR20 series packaging molds, optional or additional specifications
|
Shelling mold
|
Various specifications such as CR16, CR20, CR24, and CR30 can be selected or added
|
Installation dimensions
|
L290mm*W205mm*H330mm
|
Weight
|
25Kg
|
Other functions
|
With the function of preventing short circuit of battery seal
|
Structure material
|
High strength chrome steel, with environmentally friendly plating and spraying treatment on the surface, never rusting
|