products
PRODUCTS DETAILS
Home > Products >
Electrode Automatic Slitting Cuting equipment Battery Slitting machine

Electrode Automatic Slitting Cuting equipment Battery Slitting machine

Payment Method: T/T, Western Union
Detail Information
Brand Name
GERUISI
Model Number
GRS-110BH-750
Maximum Slitting Electrode Width:
≤650mm
Weight:
About 2T
Unwinding Mode::
Single-axis Passive Unwinding, Automatic Correction, Constant Tension Control;
Guide Roller Width::
≥750mm
Cutting Accuracy::
± 0.1mm
Cutting Material::
9-30μm Copper Foil Or Aluminum Foil, Coated With Electrode Material On Both Sides, After Drying And Rolling, The Thickness Of 50~300μm Battery Electrode Sheet
Highlight:

adjustable electrode punching machine

,

ODM electrode punching machine

,

ODM electrode slitting machine

Product Description
  • Equipment Specifications:

1) Power requirements: 380V/ three-phase /50Hz, power: 4KW

2) Compressed air: pressure: 0.6MPa, flow: 0.04M3 /min;

3) Cutting material: 9-30μm copper foil or aluminum foil, coated with electrode material on both sides, after drying and rolling, the thickness of 50~300μm battery electrode sheet;

4) Unwinding mode: single-axis passive unwinding, automatic correction, constant tension control;

5) Maximum width of unwinding: 660mm;

Winding diameter: maximum not less than 500mm;

6) Guide roller width: ≥750mm;

7) Transmission speed: mechanical speed: 50m/min, continuously adjustable.

8) Cutting accuracy: ± 0.1mm;

9) Material rewinding: upper and lower dual axis winding, winding diameter: maximum not less than Φ500㎜;

10) Total weight of equipment: about 2T,

The bearing capacity of the ground must be greater than 1.5T/m2, and a supporting plate (provided by the supplier) must be placed at the bottom of the device.

11) Equipment size: about 2050mm long x 1800mm wide x 1600mm high

 

  • Device performance specifications and parameter requirements
Continuous slitting intermittently coated or continuously coated battery electrode, mechanical speed: 50m/min, continuously adjustable.
Can change the slitting width and slitting number by replacing the pad, slitting width accuracy: ≤± 0.1mm;
Maximum slitting Electrode width: ≤650mm;
The winding and discharging reel is an air expansion shaft (among which: winding adopts slip air expansion shaft), with an axle diameter of 76.2mm(3-inch standard type),
The maximum winding and unwinding diameter is 500mm, which can be unwinding by lift truck;
Winding capacity 150 ~ 300kg, winding bearing capacity 150 ~ 300Kg;
Automatic tension control of winding and unwinding, tension value can be set continuously, synchronous control of winding;
Unwinding correction controller accuracy: ± 0.2mm.
Winding uniformity: ≤±0.2mm
Unwinding material diameter: Φ500mm
Total length of unwinding material: 80mm
Cutter diameter: Φ130mm; Blade structure;
Maximum waste edge width: ≤5mm(max);
Slitting edge without burr, no ripple, slitting width error ≤±0.1mm; After slitting, the vertical direction burr is 9μm, the plane direction burr is less than 13μm, and the straightness of the slitting is less than ±0.1mm/ m.
There is a special dust collection device for removing dust; (Vacuum cleaner user's own)
The end face of the rewinding material after the electrode plate is cut is neat and has no hem;
The upper and lower clearance of the cutter is adjustable;
There are safety protection measures before the slitting knife;
The cutting tool is equipped with a pole plate docking device;
The winding end has a bit of moving operation device (foot switch form);
Cutting speed servo speed, automatic synchronous tracking of winding;
Equipment spray color: according to the supplier's standard color sample;
The whole machine is safe, stable, reliable control and easy to operate.

 

products
PRODUCTS DETAILS
Electrode Automatic Slitting Cuting equipment Battery Slitting machine
Payment Method: T/T, Western Union
Detail Information
Brand Name
GERUISI
Model Number
GRS-110BH-750
Maximum Slitting Electrode Width:
≤650mm
Weight:
About 2T
Unwinding Mode::
Single-axis Passive Unwinding, Automatic Correction, Constant Tension Control;
Guide Roller Width::
≥750mm
Cutting Accuracy::
± 0.1mm
Cutting Material::
9-30μm Copper Foil Or Aluminum Foil, Coated With Electrode Material On Both Sides, After Drying And Rolling, The Thickness Of 50~300μm Battery Electrode Sheet
Payment Terms:
T/T, Western Union
Highlight

adjustable electrode punching machine

,

ODM electrode punching machine

,

ODM electrode slitting machine

Product Description
  • Equipment Specifications:

1) Power requirements: 380V/ three-phase /50Hz, power: 4KW

2) Compressed air: pressure: 0.6MPa, flow: 0.04M3 /min;

3) Cutting material: 9-30μm copper foil or aluminum foil, coated with electrode material on both sides, after drying and rolling, the thickness of 50~300μm battery electrode sheet;

4) Unwinding mode: single-axis passive unwinding, automatic correction, constant tension control;

5) Maximum width of unwinding: 660mm;

Winding diameter: maximum not less than 500mm;

6) Guide roller width: ≥750mm;

7) Transmission speed: mechanical speed: 50m/min, continuously adjustable.

8) Cutting accuracy: ± 0.1mm;

9) Material rewinding: upper and lower dual axis winding, winding diameter: maximum not less than Φ500㎜;

10) Total weight of equipment: about 2T,

The bearing capacity of the ground must be greater than 1.5T/m2, and a supporting plate (provided by the supplier) must be placed at the bottom of the device.

11) Equipment size: about 2050mm long x 1800mm wide x 1600mm high

 

  • Device performance specifications and parameter requirements
Continuous slitting intermittently coated or continuously coated battery electrode, mechanical speed: 50m/min, continuously adjustable.
Can change the slitting width and slitting number by replacing the pad, slitting width accuracy: ≤± 0.1mm;
Maximum slitting Electrode width: ≤650mm;
The winding and discharging reel is an air expansion shaft (among which: winding adopts slip air expansion shaft), with an axle diameter of 76.2mm(3-inch standard type),
The maximum winding and unwinding diameter is 500mm, which can be unwinding by lift truck;
Winding capacity 150 ~ 300kg, winding bearing capacity 150 ~ 300Kg;
Automatic tension control of winding and unwinding, tension value can be set continuously, synchronous control of winding;
Unwinding correction controller accuracy: ± 0.2mm.
Winding uniformity: ≤±0.2mm
Unwinding material diameter: Φ500mm
Total length of unwinding material: 80mm
Cutter diameter: Φ130mm; Blade structure;
Maximum waste edge width: ≤5mm(max);
Slitting edge without burr, no ripple, slitting width error ≤±0.1mm; After slitting, the vertical direction burr is 9μm, the plane direction burr is less than 13μm, and the straightness of the slitting is less than ±0.1mm/ m.
There is a special dust collection device for removing dust; (Vacuum cleaner user's own)
The end face of the rewinding material after the electrode plate is cut is neat and has no hem;
The upper and lower clearance of the cutter is adjustable;
There are safety protection measures before the slitting knife;
The cutting tool is equipped with a pole plate docking device;
The winding end has a bit of moving operation device (foot switch form);
Cutting speed servo speed, automatic synchronous tracking of winding;
Equipment spray color: according to the supplier's standard color sample;
The whole machine is safe, stable, reliable control and easy to operate.

 

Sitemap |  Privacy Policy | China Good Quality Coin Cell Assembly Machine Supplier. Copyright © 2024-2025 WUHAN GRACE NEW ENERGY CO., LTD. . All Rights Reserved.